Using the Incredible PBX 13-13 Web GUI

NOTE: If you plan to upgrade to the Whole Enchilada, you can skip this section. It's for those that wish to roll their own PBX from the ground up.

Most of the configuration of your PBX will be performed using the web-based Incredible PBX GUI with its FreePBX 13 GPL modules. Use a browser pointed to the IP address of your server and choose Incredible PBX Admin. Log in as admin with the password you configured in the previous step. HINT: You can always change it if you happen to forget it.

To get a basic system set up so that you can make and receive calls, you'll need to add a VoIP trunk, create one or more extensions, set up an inbound route to send incoming calls to an extension, and set up an outbound route to send calls placed from your extension to a VoIP trunk that connects to telephones in the real world. You'll also need a SIP phone or softphone to use as an extension on your PBX. Our previous tutorial will walk you through this setup procedure. Over the years, we've built a number of command line utilities including a script to preconfigure SIP trunks for more than a dozen providers in seconds. You'll find links to all of them here.

Ha estat útil la resposta?

 Imprimeix aquest Article

Llegir també

Upgrading to Incredible PBX Whole Enchilada

There now are two more pieces to put in place. The sequence matters! Be sure to upgrade to the...