Firewall Configuration

All of our installation, except for the PBX in a Flash, comes with apf firewall pre-installed.  The number of port open may or may not be sufficient for your requirement.  You are free to change them.  You may also replace it with other firewall.  You may do so since you will be granted a root access.

Please note that it is your responsibility to keep your server secure.

Here are some information about apf http://www.rfxn.com/projects/advanced-policy-firewall/

For  PBX in a Flash, please refer to "Firewall Configuration" in the PBX in a Flash specific FAQ.

UPDATE:

As of 1/10/2011 any new server and rebuild server will have combination centos iptables firewall and fail2ban

Hjalp dette svar dig?

 Print denne artikel

Læs også

Issue with IAX Call rejected, CallToken

If you have problem connecting through IAX protocol, please check if you see " Call...

How to troubleshoot emails not sending out

First thing to check when no emails are being sent or you're not getting any emails from your...

How to reboot your pbx server

If you have problems getting into your pbx, first please read this to make sure it is not banned...

Call Quality Troubleshooting

In the case that you are experiencing bad call quality please consider the following suggestions....

How to change your Asterisk System to a different one

As of 2/25/2011,  this feature is not available anymore.  Please send us a ticket to...